External Heat Adsorption Compressed Air Dryer

such external heat Adsorption compressed air dryer is strictly made according to industry standard, enterprise standard and ISO

External Heat Adsorption Compressed Air Dryer

drying and purifying the compressed air Compressed air is polluted with dirt particles, water, oil, oil vapor and condensate.

These contaminants result in high maintenance costs, premature wear, spoiledproducts and the failure of control systems. This regenerative twin-tower dryerwill effectively remove these contaminants.The adsorption principle used in this design is simple, robust and flexible. Continuous

drying is accomplished by the operation of 2 desiccant towers. Compressedair is dried through one tower while the other desiccant tower is being regenerated.

The regeneration heating cycle of the desiccant is accomplished using a dryair purge flow heated by an external electric heater. The regeneration coolingcycle is performed using the same flow of dry compressed air taken from the dryer

outlet to ensure accurate dew point performance.By using proven engineering technology and components, this equipment is extremelyreliable.

Features:

1) Low running cost, low pressure drop and steady dew point

2) Easy to install and maintain

3) Ideal for high environmental temperatures

4) Microprocessor control

5) Suitable for a range of air compressors

6) Custom designs welcome

Specifications:

1) Constant pressure dew point: -20°C, -40°C

2) Rated operational pressure: 0.60 - 0.95Mpa(g)

3) Regenerative consumption: <7%

4) Inlet air temperature: ≤40°C

5) Desiccant: activated aluminum oxide or molecular sieve

6) Power supply: 380V AC, 50Hz

7) Pressure drop: ≤0.02Mpa (working pressure: ≤0.7MPa)

8) Fully automatic, interlocked operation controlled by PLC on a fixed 100min time cycle9) End connection/flange: JB/T81